error code E4 F3 - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

error code E4 F3 Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GR470LXMPO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

magichands		#1 Posted : Tuesday, April 15, 2014 4:36:30 PM(UTC)
Rank: Member Groups: Registered Joined: 4/14/2014(UTC) Posts: 1		My oven started shutting off and giving me a error code E4 -F3-. I purchased a new oven sensor part # W10181986. I installed the new sensor. The oven will work for about ten minutes or so and then it will beep and give the same error message. I tried unplugging the stove for five minutes with the same results.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, April 16, 2014 3:48:57 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for Whirlpool GR470LXMP0 Range - AppliancePartsPros.com See the attachment for the tech sheet. I am assuming that it only happens when you use the lower oven. Most likely it is the control board. I would check any connectors between the sensor and the control board. Could be a bad/cold solder joint on the control board. Cold solder joints are often a duller silver color and/or may have pin holes. Gently wiggle the sensor connector on the board while looking at the solder side to see if the connector leg moves in the solder. Check the solder for other components in the sensor copper trcks onn the board. A magnifying glass help with the above checks. If all looks OK then odds are that the control board is toast. File Attachment(s): GR470.pdf (215kb) downloaded 15 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close