Whirlpool direct drive washer makes ratchet noise while spinning - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool direct drive washer makes ratchet noise while spinning Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSR8233EQ0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

washergirl2014		#1 Posted : Tuesday, March 18, 2014 11:13:58 AM(UTC)
Rank: Member Groups: Registered Joined: 3/18/2014(UTC) Posts: 2		Can anyone help with this?? My Whirlpool Ultimate Care II washer (Model LSR8233EQ0) would not spin and started making a ratcheting noise when it tried to spin. I replaced the motor coupler and now it spins. But, it still makes that ratcheting noise during the spin cycle. It drains & agitates fine. It looks as if the agitator is slipping during the spin cycle. Could this be a clutch or brake issue? Local repair shop says transmission appears fine. Here is a link to a video of it that I posted on youtube: Help! Whirlpool Ultimate Care II washer makes grinding noise on spin cylce - YouTube


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Tuesday, March 18, 2014 1:03:33 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Faulty transmission for sure. Eric


User Profile View All Posts by User View Thanks

washergirl2014		#3 Posted : Tuesday, March 18, 2014 1:41:54 PM(UTC)
Rank: Member Groups: Registered Joined: 3/18/2014(UTC) Posts: 2		What makes you so sure it is the transmission? I ask because the noise is not present during agitation, only during the spin cycle.


User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Tuesday, March 18, 2014 2:47:07 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Iv'e heard/seen this problem many times. The noise is caused by the fact that the agitate gear in the transmission is not fully disengaging from the agitator shaft during spin. It is the splines in the agitate gear rubbing against the splines on the agitator shaft because the gear is not fully disengaged. This is usually caused by a worn agitate cam which is only a few dollars but requires complete teardown of the gearcase. Unless you are an experienced mechanic, better to just replace the gearcase. Worth doing on this machine if it's otherwise in good shape. Whirlpool 3360629 Neutral Drain Transmission - AppliancePartsPros.com Eric


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close