Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
JEP0963  
#1 Posted : Saturday, February 22, 2014 8:14:59 AM(UTC)
JEP0963

Rank: Member

Groups: Registered
Joined: 2/22/2014(UTC)
Posts: 1

My whirlpool duet sport dryer was just working fine and now it stopped. When I tried to start a new load, the particular cycle buttons light up and the sensor indicator lights up, but then I hear a click and nothing happens. The code I get is F-01.

I read that it could be the user interface board (miscommunication issue?).

Please advise before I purchase this part.

Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Lenmo  
#2 Posted : Sunday, July 20, 2014 9:54:18 PM(UTC)
Lenmo

Rank: Member

Groups: Registered
Joined: 7/20/2014(UTC)
Posts: 1

Yea its your board. you don't need a new board you just need to pull the board out and turn it over to reveal the melted solder - resolder and put back in. There's a video of this on the internet lots of people had the same circuit melt the same way don't spend $230 for nothing my just did it tonight.
Users browsing this topic
Similar Topics
Need part number for user interface boards (Washer Repair)
by sls_colorado 9/17/2012 5:51:51 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.