Kenmore 80 series washer spinning problems - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore 80 series washer spinning problems Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.2882791	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

dw17dw17		#1 Posted : Tuesday, February 11, 2014 9:53:23 AM(UTC)
Rank: Member Groups: Registered Joined: 2/11/2014(UTC) Posts: 1		i have a Kenmore 80 series washer 110.2882791 and it is being a pain! Everything work fine except for when it drains/spins. It drains fine but it won't spin, but soon as I open the lid you can here a clunk and then it grabs and when the lid is closed in will spin again. Once it starts spinning it will continue..until the next drain cycle. This is what it is doing IMG 08031 - YouTube Suggestions? Thanks!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Tuesday, February 11, 2014 6:01:38 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		It's not supposed to spin until after it drains for 2 minutes. After the two minute drain, the motor will pause to shift the gearcase out of neutral. You are pausing the motor early by opening/closing the lid. Eric


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close