Can someone confirm this element is bad? Pic inside. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Can someone confirm this element is bad? Pic inside. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: REX3514RQ1	Brand: Roper	Age: 1 - 5 years
Previous Topic Next Topic

Scott90		#1 Posted : Sunday, January 5, 2014 11:35:51 AM(UTC)
Rank: Member Groups: Registered Joined: 1/5/2014(UTC) Posts: 2		Hello all, I opened up my dryer today to clean out all vents because it has been taking 2-3 times to fully dry out clothes. It heats up, but I guess not hot enough it seems. I took the element out and this is what I found... As you can see, half of the element looks fried. I do not have a multimeter to test this out, but I think it is safe to say half the element went bad and that is why the dryer is now working twice as hard to dry the clothes. This has been my first time in dealing with a dryer issue so I am looking for confirmation before ordering a new element. Thanks in advance everyone, I appreciate the feedback.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Sunday, January 5, 2014 12:36:12 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Can't confirm without taking multimeter readings. Coil should read between 7.8 and 11.8 ohms, reading from coil terminal to the metal case should be infinity. Looks like part of the coil has been grounding out which would cause it to be on all the time but at reduced wattage output. Whirlpool 279838 Whirlpool Dryer Heating Element - AppliancePartsPros.com Eric


User Profile View All Posts by User View Thanks

Scott90		#3 Posted : Sunday, January 5, 2014 12:41:09 PM(UTC)
Rank: Member Groups: Registered Joined: 1/5/2014(UTC) Posts: 2		Is there a good online guide somewhere to tell me exactly how to test this using a multimeter? I have never used one before on anything. And regardless, do I need a new element now no matter what?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close