Rank: Member
Groups: Registered
Joined: 11/16/2013(UTC) Posts: 1
|
I would like to know how to get to and remove the control panel to replace a fuse in the microwave. I have already brought the microwave out enough to work in it, and have replaced the 20amp fuse, but this did not fix my "door" code.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/12/2013(UTC) Posts: 957
|
If you are getting a "DOOR" error, you have a faulty door switch, not a fuse issue. Do you have a meter to test with? Also, you must know that microwave service can be dangerous, even if it is unplugged, due to the large capacitor in the unit that is capable of holding a charge for a long time. Knowing this, are you comfortable continuing with this repair?
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close