Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
oven doesn't heat higher than 375 degrees
Options
Go to last post Go to first unread
Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
aml14103  
#1 Posted : Monday, October 12, 2009 8:46:03 AM(UTC)
aml14103

Rank: Member

Groups: Registered
Joined: 10/12/2009(UTC)
Posts: 3
I have replaced both the ignitor & temp. sensor, but the oven still will not heat above about 350-375 degrees. I've replaced the ignitor in the past & saw an immediate difference, but not this time so then changed temp. sensor. Still no luck.:(
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, October 12, 2009 7:58:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sounds like the problem is a bad control board. If you need the correct part number then post the complete model and serial numbers of the oven.

Gene.
Back to top
aml14103  
#3 Posted : Thursday, October 15, 2009 1:51:40 PM(UTC)
aml14103

Rank: Member

Groups: Registered
Joined: 10/12/2009(UTC)
Posts: 3
Thank You. The oven is a Maytag, mod# CRG9800AAE ser# 18703381KK
Is this something I might be able to change myself or is it going to be complicated & better left to a pro? After looking up similar parts to get an idea of price I was hoping it wasn't going to be this, but I guess it's still cheaper than a new oven.... Thank you again!!
Back to top
Gene  
#4 Posted : Friday, October 16, 2009 12:16:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. This part is not cheap and can save a lot if you do it yourself. If you are somewhat handy this part is not too difficult to replace yourself.

Start with removing the light cover and the light bulb. Remove both end caps.

- The control board (aka a clock) Part number: AP4102834
Back to top
aml14103  
#5 Posted : Friday, October 16, 2009 5:24:05 PM(UTC)
aml14103

Rank: Member

Groups: Registered
Joined: 10/12/2009(UTC)
Posts: 3
If I was able to manage the ignitor & the temp.sensor I guess I can give this a try. I didn't think it would be too complicated, just wanted to be sure before I tried. I guess it still beats buying a new oven. Thanks Again!
Back to top
Gene  
#6 Posted : Saturday, October 17, 2009 4:28:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Good luck and keep us posted.

Gene.
Back to top
Kazuto  
#7 Posted : Wednesday, March 25, 2015 5:09:42 PM(UTC)
Kazuto

Rank: Member

Groups: Registered
Joined: 3/25/2015(UTC)
Posts: 1
I have a maytag range model CRG9800AAE serial # 10000247HB. The clock works but none of the oven controls work. Please help. Thanks
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET