Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
GodSmackedMe  
#1 Posted : Sunday, September 15, 2013 11:16:17 PM(UTC)
Quote
GodSmackedMe

Rank: Member

Groups: Registered
Joined: 9/15/2013(UTC)
Posts: 1

Washer/dryer combo and the washer is apparently dead.

Like the title says, it will fill the tub, but wont do anything else except for a loud buzz/hum.

I took off the front panel hoping it was just a belt (still in place), or to see if I could locate where the sound was coming from, but it echoes throughout the metal of the whole thing so I cannot pinpoint where the sound is coming from.

I can spin the tub in one direction by hand, but not the other direction.

Any suggestions on where I should start? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
iblashaun!  
#2 Posted : Sunday, April 14, 2019 3:35:42 PM(UTC)
Quote
iblashaun!

Rank: Member

Groups: Registered
Joined: 11/2/2018(UTC)
Posts: 0
United States
Location: missouri

i had a Frigidaire(a lot of these same parts) did same thing everyone tried saling me whole trans. turned out down by trans.there is a bearing bought from e bay under 1500 fixed my problem. Sure beat the over 200.00 for new trans. hope this helps

Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.