Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE Profile Dishwasher won't drain
Options
Go to last post Go to first unread
Model: PDW7880JOOSS Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
tms101  
#1 Posted : Saturday, September 14, 2013 9:47:52 PM(UTC)
tms101

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 2
Hi,
After attempting a reset with the breaker and check the drain hose for plugs, I can't seem to get the dishwasher to drain and finish a cycle.
I have been reading some posts of other dishwashers as well as going through the parts list with the q and a to no avail. However, I did see a post that led me to believe that the drain pump may be the problem. The symptoms are: once dishwasher goes into rinsing mode, heat element turns on, melting plastic smell, no other motor sounds, and then counts down to zero with no other modes completed.
Could it be the drain pump frying and not draining or is something else the big problem?
Thanks,
Tom
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Tuesday, September 17, 2013 2:26:16 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here your parts
Parts for GE PDW7880J00SS Dishwasher - AppliancePartsPros.com

[COLOR="Blue"]Could it be the drain pump frying and not draining or is something else the big problem?[/COLOR]
Could be but I doubt it.

You would have to check for 120 volts across the drain pump.
If it has the correct voltage but does not pump out then it is the drain pump.

[COLOR="Blue"]The symptoms are: once dishwasher goes into rinsing mode, heat element turns on, melting plastic smell, no other motor sounds, and then counts down to zero with no other modes completed.[/COLOR]
Not quite sure I understand the above.
You have to find out what is overheating.
Is this in rinse only mode or is it the final rinse?
Does the unit ever pump out?

Sounds more like a control board problem.
THIS FORUM IS DEAD!!!!!!!
Back to top
tms101  
#3 Posted : Sunday, September 22, 2013 8:15:44 AM(UTC)
tms101

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 2
Thanks. I am going to pull it out today and hopefully find only a pump that is fried. I believe that the dishwasher never went into any other mode beyond washing and cannot drain due to the pump malfunction. So, there is no rinse or drain mode. It simply stops and does not drain.
Back to top
Users browsing this topic
Similar Topics
GE profile dishwasher won't drain completely (Dishwasher Repair)
by nazia 2/25/2014 5:52:10 AM(UTC)
GE Profile Dishwasher Won't drain comletely (Dishwasher Repair)
by amyg5576 7/13/2012 5:52:19 AM(UTC)
GE Profile dishwasher won't drain completely (Dishwasher Repair)
by wcimo 3/12/2011 9:52:39 AM(UTC)
GE profile dishwasher won't drain (Dishwasher Repair)
by tlp385697 6/23/2010 6:26:33 AM(UTC)
GE Profile dishwasher won't drain completely (Dishwasher Repair)
by teetime 12/5/2008 8:44:58 AM(UTC)
GE profile dishwasher won't drain (Dishwasher Repair)
by Wauseon 3/26/2008 5:45:15 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET