Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

3 Pages<123
Options
Go to last post Go to first unread
Linkslam  
#21 Posted : Friday, August 30, 2013 12:36:44 PM(UTC)
Linkslam

Rank: Member

Groups: Registered
Joined: 8/27/2013(UTC)
Posts: 14

Yes it's not trying to drain before it goes into spin cycle. The washer should drain the water out before it starts spinning. My neutral drain is not working.
fairbank56  
#22 Posted : Friday, August 30, 2013 12:43:21 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
That may be but the fact that your neutral drain is not working is not the reason the washer doesn't drain.
Linkslam  
#23 Posted : Friday, August 30, 2013 12:57:49 PM(UTC)
Linkslam

Rank: Member

Groups: Registered
Joined: 8/27/2013(UTC)
Posts: 14

Yea. It's not trying to drain before the spin cycle starts because the neutral drain function isn't working and it's not draining because the motor isn't turning the water pump fast enough to make it drain.
fairbank56  
#24 Posted : Friday, August 30, 2013 1:24:10 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
It's quite possible that the neutral drain is not working directly because of the improper motor operation. Neutral drain is unreliable when rotating the gearcase input shaft by hand or even by using a drill motor to run it. It must have the full torque and rpm of a properly operating motor in order to function. Iv'e installed neutral drain kits and even completely overhauled gearcases and test them using a drill motor before filling with oil and reinstalling the cover. Neutral drain rarely works when doing this but functions fine when running off the 1/2hp drive motor.

Eric
Linkslam  
#25 Posted : Friday, August 30, 2013 1:44:05 PM(UTC)
Linkslam

Rank: Member

Groups: Registered
Joined: 8/27/2013(UTC)
Posts: 14

Ok. I see what your saying. I ordered a new motor and neutral drain kit. I'm going to try the motor first to see what happens and then I will install the neutral drain kit if necessary. I will post up my results when I install the new parts. Thanks for all of the help.
Users browsing this topic
Guest (3)
3 Pages<123
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.