Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Agitator Is Locked Up
Options
Go to last post Go to first unread
Model: LSQ7030LQO Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
macman402  
#1 Posted : Tuesday, July 2, 2013 9:19:07 AM(UTC)
macman402

Rank: Member

Groups: Registered
Joined: 5/19/2013(UTC)
Posts: 5
The agitator is locked up and will not spin, it is making a grinding noise. I've replaced the clutch assembly approximately 1 month ago along with short cam agitator kit...
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Tuesday, July 2, 2013 10:59:25 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Lower agitator or upper?
Back to top
macman402  
#3 Posted : Tuesday, July 2, 2013 1:06:24 PM(UTC)
macman402

Rank: Member

Groups: Registered
Joined: 5/19/2013(UTC)
Posts: 5
It is the bottom agitator....
Back to top
fairbank56  
#4 Posted : Tuesday, July 2, 2013 1:11:12 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Are you saying it won't agitate back and forth in agitate mode or it won't spin with the basket in spin mode?

Eric
Back to top
macman402  
#5 Posted : Tuesday, July 2, 2013 1:14:22 PM(UTC)
macman402

Rank: Member

Groups: Registered
Joined: 5/19/2013(UTC)
Posts: 5
The basket will not spin at all....
Back to top
macman402  
#6 Posted : Tuesday, July 2, 2013 1:22:51 PM(UTC)
macman402

Rank: Member

Groups: Registered
Joined: 5/19/2013(UTC)
Posts: 5
Water emptying but tub not spinning making grinding noise. Unable to manual turn tub
Back to top
fairbank56  
#7 Posted : Tuesday, July 2, 2013 1:37:42 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Remove the cabinet, jump out the lid switch and run it in spin mode while observing the clutch hub. If the motor is spinning but the clutch hub is not, check the motor coupler. If it is good and is rotating the gearcase input shaft, the gearcase is bad. If the clutch hub is spinning either the clutch is faulty, brake cam driver faulty, brakes stuck, tub drive block faulty.

Motor must pause for a few seconds after drain in order to go into spin.

Eric

UserPostedImage
Back to top
macman402  
#8 Posted : Tuesday, July 2, 2013 1:40:39 PM(UTC)
macman402

Rank: Member

Groups: Registered
Joined: 5/19/2013(UTC)
Posts: 5
Thanks, I will try that
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET