Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
MichPhil  
#1 Posted : Friday, May 31, 2013 5:59:13 PM(UTC)
MichPhil

Rank: Member

Groups: Registered
Joined: 5/2/2013(UTC)
Posts: 4

We have replaced the control board and door latch. Still getting error code E45 and washer still stops and shuts off when it goes into the 1st spin cycle.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Sunday, June 2, 2013 3:20:09 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

The next suspect is the speed or motor control board.

Inside the lower service panel are some tech notest that will tell you how to do some testing, but in the end you might just have to try replacing it.

If you buy from this site and the board does not fix the problem you can return it.

Good luck.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.