Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
astaroth  
#1 Posted : Wednesday, May 8, 2013 3:38:40 AM(UTC)
astaroth

Rank: Member

Groups: Registered
Joined: 5/8/2013(UTC)
Posts: 1

Can anyone tell me what the difference is between these two parts labeled defrost themostat in my fridge? What do they do differently?

WR50X10068
WR50X10071

I have both located in my freezer, attached side-by-side onto the copper tubing.

Thanks!
Asty
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ApplianceJunk  
#2 Posted : Wednesday, May 8, 2013 8:17:41 AM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

Two different cut-out temps. The temp is printed on the side of them.
Joe / APP Team  
#3 Posted : Wednesday, May 8, 2013 11:32:56 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: astaroth Go to Quoted Post
Can anyone tell me what the difference is between these two parts labeled defrost themostat in my fridge? What do they do differently?

WR50X10068
WR50X10071

I have both located in my freezer, attached side-by-side onto the copper tubing.

Thanks!
Asty


Asty, The WR50X10068
Part number: AP3884317
Part number: AP3884317

is a 'Hi Limit" or safety thermostat. If for some reason the heater remains active (stuck thermostat, timer circuit, shorted wire, etc.) If or when the heater area reaches a temperature of approximately 140 dgrs. the thermostat opens and removes power to the heater. This process should reduce if not eliminate any damage to the refrigerator or food product.
The WR50X10071
Part number: AP3884319
Part number: AP3884319

is a defrost or "regulating" thermostat. When the timer advances into a defrost cycle, the heater is activated, as long as the heater and evaporator coils are frosted, the thermostat remains closed, when the temperature in the heater area reaches approximately 45 to 50 dgrs, the thermostat "opens" and removes power to the heater, it takes approximately 10 to 12 minutes for the thermostat to "open". When the timer advances into the cooling mode, as the coils develop frost, the thermostat "closes" and the process begins again.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.