Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Shindigit  
#1 Posted : Saturday, May 4, 2013 10:54:15 AM(UTC)
Quote
Shindigit

Rank: Member

Groups: Registered
Joined: 5/4/2013(UTC)
Posts: 1

I have just recently replaced the drive belt in my Frigidaire washer since it wasn't spinning. The old belt was obviously very old and barely even still a belt. After replacing said belt, the machine would spin beautifully for roughly a week. Today I washed a large comforter (probably shouldn't have apparently). Regardless, the machine would not spin again upon the next load. If I take the clothes out it will spin, but is very slow to get going. If there are clothes in, the motor pulley will spin, but the belt will not catch and just burns up. Hopefully this is a detailed enough description. Please help. Don't wanna have to go to the laundromat again!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ApplianceJunk  
#2 Posted : Saturday, May 4, 2013 6:32:33 PM(UTC)
Quote
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

Did you install the correct belt?
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.