Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
RBarnes  
#1 Posted : Monday, April 8, 2013 10:43:25 AM(UTC)
RBarnes

Rank: Member

Groups: Registered
Joined: 4/8/2013(UTC)
Posts: 1

I have a GE front load washer it is 5 yrs.old Since having this washer it has been nothing but trouble.I am tired of calling the GE repair line to have someone come fix it every month or two.The last time they were here they did not have the parts to fix it so they rigged it to work until the parts came in (they were shipped to my house).Well today it finally broke the belt (which is one of the parts they sent me).Can you PLEASE tell me how to put it on so iI don't have to pay another service charge:mad: Thank you RBarnes
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Tuesday, April 9, 2013 10:48:49 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

If you take off the back you should be able to just roll the belt on.

This is one of the worst models ever built. They are almost impossible to diagnose and then are very expensive and difficult to fix. It was way over-engineered.

After a while you just have to cut your losses and replace it.

Good luck.
Users browsing this topic
Guest (2)
Similar Topics
How to replace belt (Washer Repair)
by jbillups 8/9/2011 6:52:21 AM(UTC)
how to replace belt on General Electric Washer (Washer Repair)
by jh81 11/29/2009 1:36:39 AM(UTC)
how to replace belt on kenmore stackable dryer (Dryer Repair)
by john buckner 8/28/2009 5:29:38 PM(UTC)
how to replace belt for tumble dryer (Dryer Repair)
by wendy poulton 11/18/2008 3:59:35 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.