ge washer will not rinse or spin - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

ge washer will not rinse or spin Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WWSE5240DOWW	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

tmm313psu		#1 Posted : Friday, October 2, 2009 3:48:31 PM(UTC)
Rank: Member Groups: Registered Joined: 10/2/2009(UTC) Posts: 1		my washer will run through the wash cycle until it hits the rinse part and then it stops. i bypassed the lid switch and no change. what else couldc the culprit be? thanks for any input


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Sunday, October 4, 2009 6:45:03 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I assumeit drains ok, if not check out the pump and drain hoses. You need to observe the spin cycle in action. Take off the front panel and put the machine in spin mode. If the motor and belt are turning but the transmission is not, unplug the machine and try to turn the transmission pulley by hand. If it will not turn the transmission/brake is probably bad and will have to be replace. If the motor will not turn, take off the connection and clean it thoroughly with contact cleaner. If that does not fix it, check the wiring for a break or a short.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close