Dishwasher start button blinking but does not power Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KUDK01ILBS5	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

onehawaiian		#1 Posted : Wednesday, February 6, 2013 4:10:02 AM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2013(UTC) Posts: 2		When I press the normal cycle start button it blinks and when I press the cxl button it blinks as well. The dishwasher will not start. I checked the drain motor, door switches, thermistor -all works and recently I replaced the electronic control board. What may be wrong?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Wednesday, February 6, 2013 11:51:13 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		HI. Most likely you need to replace the control panel Part number: 8531239 If you got the control board from APP you may return it back (contact our customer service). Here are the breakdown diagrams and Control Panel parts for Whirlpool KUDK01ILBS5 - AppliancePartsPros.com Post the results. Simon.
User Profile View All Posts by User View Thanks

onehawaiian		#3 Posted : Thursday, February 7, 2013 12:02:14 AM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2013(UTC) Posts: 2		great, I ordered it thank U much
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Thursday, February 7, 2013 10:53:12 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome. Simon.
User Profile View All Posts by User View Thanks

glmy78		#5 Posted : Friday, February 8, 2013 3:53:49 PM(UTC)
Rank: Member Groups: Registered Joined: 7/25/2011(UTC) Posts: 7		Originally Posted by: Simon / APP Team You are welcome. Simon. My kitchen aid dishwasher (2years old) (Model KUDS301VBLO) has power but the start light blinks and wont work. Do you think i also need to replace the control panel? Is it the same part #? Thanks.
User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Monday, February 11, 2013 9:25:01 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. If the start LED flashes 3 times when the botton pressed: - The door has not been open between the cycles. - Door switch stuck closed. The door latch Part number: W10380262 Here are the breakdown diagrams and Control Panel and Latch parts for Whirlpool KUDS30CXBL0 - AppliancePartsPros.com Post the results. Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)