Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Scottpiggs  
#1 Posted : Wednesday, August 8, 2007 2:37:09 PM(UTC)
Scottpiggs

Rank: Member

Groups: Registered
Joined: 8/8/2007(UTC)
Posts: 3

:confused: Found lint at 90, didn't go farther. Gas dryer, ignites for 10 to 15 seconds then shuts off.??
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, August 8, 2007 9:15:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Scottpiggs
Most likely the problem is clogged vent not the dryer itself. Disconnect the vent hose from the dryer and run one or two loads with the hose disconnected. If the drying time is better then the vent needs cleaning.
Good luck.
Gene.
Scottpiggs  
#3 Posted : Thursday, August 9, 2007 5:39:30 AM(UTC)
Scottpiggs

Rank: Member

Groups: Registered
Joined: 8/8/2007(UTC)
Posts: 3

Thank you for the input, the vent stack 90's into the wall and up through to the roof. need to purchase a long brush the clean the stack anyway....
Scottpiggs  
#4 Posted : Friday, August 10, 2007 5:28:13 AM(UTC)
Scottpiggs

Rank: Member

Groups: Registered
Joined: 8/8/2007(UTC)
Posts: 3

Vent was blocked at roof level, wasp nest and lent, thank you. Just need to find vent brush?.....:)
Gene  
#5 Posted : Friday, August 10, 2007 11:49:49 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Scottpigs
You can try the LintEater, rotary dryer vent cleaning kit which attaches to a drill and will clean a dryer vent. The part number for the LintEater is AP4240727
Good luck.
Gene.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.