Steps to install part AP3885081 (8201786) Compressor starting device kit - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Steps to install part AP3885081 (8201786) Compressor starting device kit Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GD5SHAXKQ00	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

yxie881		#1 Posted : Tuesday, January 29, 2013 7:50:07 PM(UTC)
Rank: Member Groups: Registered Joined: 1/29/2013(UTC) Posts: 2		My old part ASP1001 was burned. I called. The service rep told me Whirlpool redesigned the part. The new part is AP3885081 or 282383. After I got the part, I can't figure out how to install it. It looks not match old part. Anyone can help me? My compressor is EGY90, so I have to use 2188830 part. The instruction book is not helpful without details step by step guide. Thank you so much! Mark


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Wednesday, January 30, 2013 3:33:28 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Use one of the large, off white boxes, selection determined by the instructions. The run capacitor plugs in the smaller pins and the fridg power wires plug in the larger spade terminals, not polarity sensitive. Do not use one of the descrete ptc devices as you could burn out the compressor if wired wrong.


User Profile View All Posts by User View Thanks

yxie881		#3 Posted : Wednesday, January 30, 2013 7:43:02 AM(UTC)
Rank: Member Groups: Registered Joined: 1/29/2013(UTC) Posts: 2		Thank so much for your direction. But I am still confused by these part names. If possible, may I have some visual help, such as chart, phto, or picture on how to connet wire? I am afraid of burning my compressor. Thanks again! Yxie881


User Profile View All Posts by User View Thanks

richappy		#4 Posted : Wednesday, January 30, 2013 2:24:59 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If you use one of the large start devices, you cannot burn out the compressor. Without me being there, rather difficult to help.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close