Acceler ice NOT ! - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Acceler ice NOT ! Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 106.56534400	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

Peter A		#1 Posted : Wednesday, November 28, 2012 5:18:44 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2012(UTC) Posts: 6		Ice dispenser in the door does not function. I have cleaned out the ice bin to make sure that it is not frozen up. It just stopped working. Any help would be appreciated. Thanks !


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, November 29, 2012 2:38:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Peter, Remove the ice dispenser motor and test it as described in the attached instructions. - The motor Part number: 2188869 Gene. File Attachment(s): Removing and reinstalling the motor (in-door ice).doc (622kb) downloaded 20 time(s). Troubleshooting the motor (in-door ice).doc (348kb) downloaded 17 time(s).


User Profile View All Posts by User View Thanks

Peter A		#3 Posted : Thursday, November 29, 2012 3:28:39 PM(UTC)
Rank: Member Groups: Registered Joined: 5/31/2012(UTC) Posts: 6		Thanks for the reply. Motor checked shorted circuit. I had hoped to avoid having to replace it, but it does not look to be that hard of a job. Thanks again. Peter A


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Friday, November 30, 2012 12:47:04 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome Peter. Keep us posted. Gene.


User Profile View All Posts by User View Thanks

NGB		#5 Posted : Friday, February 1, 2013 9:14:34 AM(UTC)
Rank: Member Groups: Registered Joined: 2/1/2013(UTC) Posts: 1		Went through the motor test and found I had no voltage to the Motor. Pulled the faceplate off the ice dispenser on the door and found the plastic parts that hold the switch in place had broken, so when the ice lever was pushed back it didn't make contact with the switch and was not sending voltage to the motor. Just FYI for further trouble shooting.


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Friday, February 1, 2013 11:35:03 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hello, I don't think you need more troubleshooting. Just replace the broken parts and you should be fine. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close