Rank: Member
Groups: Registered
Joined: 11/25/2012(UTC)
Posts: 2
|
After replacing the cavity thermostat the clock , fan, and lights worked. When you try to time cook or use the express buttons, the timer counts down but no heating. Is there another thermostat to replace.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Check the secondary interlock switch (the top switch) for continuity and inspect the wires connected to the switch. - The secondary interlock switch Part number: WB24X10029
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/25/2012(UTC)
Posts: 2
|
Replaced top switch and everything works except it will not heat. What is wrong now?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Unplug the microwave. Open the control panel and remove the red and white wires from the transformer primary winding. Plug trhe microwave back and check for 120 VAC between these wires while the control calls for heat and the door is closed. If the reading is incorrect, replace the smart board. If the reading is correct, then most likely the problem is a bad magnetron. - The smart board Part number: WB27X10718
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
