Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
GadFly  
#11 Posted : Thursday, February 21, 2013 1:54:10 PM(UTC)
GadFly

Rank: Member

Groups: Registered
Joined: 2/21/2013(UTC)
Posts: 2

Rbd305pds15
Simon / APP Team  
#12 Posted : Thursday, February 21, 2013 2:14:01 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Here is your control board

Part number: W10406070
flatcity  
#13 Posted : Tuesday, November 5, 2013 12:08:55 PM(UTC)
flatcity

Rank: Member

Groups: Registered
Joined: 11/5/2013(UTC)
Posts: 2

I installed a new control panel and got nothing. I tried testing the transformer. I disconnected the power. I tested the 2 red with the wires off
and it read .044. I tested the 2 blue and it was all over the place. Where to now. Control Board?
Guest  
#14 Posted : Thursday, April 15, 2021 11:41:23 AM(UTC)
Guest

Rank: Guest

Groups: Guests
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Simon,

Model number is GBD307PRY01.

Serial number is XT5001087.

I am having the same problem as the above with my Whirlpool in-wall double oven. Lights work. Buttons beep. Digital time doesn’t display. If you push start you get one short beep, one long beep and then three short beeps. I have not run a cleaning cycle in a long time. Any thoughts? Are the transformer or control panel parts still available?

Thanks!!!
Guest  
#15 Posted : Thursday, April 15, 2021 11:42:35 AM(UTC)
Guest

Rank: Guest

Groups: Guests
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Simon,

Model number is GBD307PRY01.

Serial number is XT5001087.

I am having the same problem as the above with my Whirlpool in-wall double oven. Lights work. Buttons beep. Digital time doesn’t display. If you push start you get one short beep, one long beep and then three short beeps. I have not run a cleaning cycle in a long time. Any thoughts? Are the transformer or control panel parts still available?

Thanks!!!
Guest  
#16 Posted : Tuesday, January 18, 2022 1:49:27 PM(UTC)
Guest

Rank: Guest

Groups: Guests
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
So my oven works intermittently. At times the control display stops displaying information and the oven does not turn on. This seems to happen after using the oven to bake. Sometimes it takes an hour or more for the display to come back on. What are the probable causes and how to I troubleshoot to isolate this problem
Users browsing this topic
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.