Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag won't start
Options
Go to last post Go to first unread
Model: MDBH979AWS3 Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
mcurtis  
#1 Posted : Wednesday, October 31, 2012 11:34:08 AM(UTC)
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4
DW is 2 years old. Options buttons work, but cycle buttons won't, and DW won't start. I'm able to run it through the diagnostic cycle by pressing high temp / heat / hight temp /heat. I'm guessing it's the controller, but would like to test the front panel buttons before ordering a control panel. Where can I find the pin out for the ribbon cable which connects the front panel to the control Panel?

Thanks
Maynard
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Wednesday, October 31, 2012 12:01:07 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

You should find the tech sheet inside the door or behind the toe panel.
Based on your description it's the control panel.

Here are the parts breakdown and 02-Control Panel Parts parts for Maytag MDBH979AWS3 - AppliancePartsPros.com

Post the results.

Simon.
Back to top
mcurtis  
#3 Posted : Wednesday, October 31, 2012 12:20:30 PM(UTC)
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4
I looked under the toe panel and took off the front panel of the dishwasher, but couldn't find a tech sheet. I'll go ahead and try the control panel.

Thanks
Maynard
Back to top
mcurtis  
#4 Posted : Wednesday, October 31, 2012 12:34:11 PM(UTC)
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4
By "control panel" , I assume you mean the controller (they call "Cntrl-Elec" ) and not the front panel (which they call the "Panel Cntrl")

Maynard
Back to top
Simon / APP Team  
#5 Posted : Wednesday, October 31, 2012 3:08:31 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
By "control panel" I meant the "Panel Cntrl".

Simon.
Back to top
mcurtis  
#6 Posted : Wednesday, November 14, 2012 9:34:50 AM(UTC)
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4
It was the Panel Cntrl. Thanks for you help and great service.

Maynard
Back to top
Simon / APP Team  
#7 Posted : Wednesday, November 14, 2012 11:01:01 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You are welcome.

Simon.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
maytag won't start, new control board (Dishwasher Repair)
by notbob 9/25/2012 6:08:20 PM(UTC)
Maytag won't start (Dishwasher Repair)
by rroth 6/22/2010 5:32:40 PM(UTC)
maytag won't start (Dryer Repair)
by suff1778 2/9/2010 9:02:21 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET