Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Thawood  
#1 Posted : Tuesday, October 23, 2012 5:16:43 AM(UTC)
Thawood

Rank: Member

Groups: Registered
Joined: 10/23/2012(UTC)
Posts: 2

October 20th 2012, our eight year old Refrigerater and Freezer both stopped cooling, we need some help to fix it. Thanks. Thawood
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
rickgburton  
#2 Posted : Tuesday, October 23, 2012 9:08:09 AM(UTC)
rickgburton

Rank: Advanced Member

Groups: Expert
Joined: 10/21/2012(UTC)
Posts: 263

[FONT=&quot]Any number of issues can cause a refrigerator to stop cooling properly. Let’s start with basic checks first. Check to see if both fans are working. The evaporator fan is in the freezer section and the condenser fan is by the compressor. If the compressor is running the condenser fan motor should also be running. Make sure the condenser coils are clean and air flow across them is not restricted. Check if the compressor is running by placing your hand on top of the compressor and feel for vibration. Compressors normally run warm to very warm. A compressor running hot to very hot could indicate a problem. Use your hand and look for frost on the evaporator cover (freezer section back wall) indicating a possible defrost problem.[/FONT]
Thawood  
#3 Posted : Tuesday, October 23, 2012 11:23:41 AM(UTC)
Thawood

Rank: Member

Groups: Registered
Joined: 10/23/2012(UTC)
Posts: 2

Let me tnak you first for your prompt response. I am at work now. When I go home I shall try what you have mentioned. Suppose, if the surface
of the condensor is hot as you have mentioned, what may have gone wrong
and what do I have to do to correct it? If it is warm as usually has to be and still not cooling what must I do then?

Thanks, Sincerely Thawood.
rickgburton  
#4 Posted : Tuesday, October 23, 2012 11:33:06 AM(UTC)
rickgburton

Rank: Advanced Member

Groups: Expert
Joined: 10/21/2012(UTC)
Posts: 263

Originally Posted by: Thawood Go to Quoted Post
Suppose, if the surface of the condensor is hot as you have mentioned, what may have gone wrong and what do I have to do to correct it? If it is warm as usually has to be and still not cooling what must I do then?

I asked first...lol. I can't answer your questions until you answer mine.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.