Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool washer spinning problem
Options
Go to last post Go to first unread
Model: LSR9434PQ1 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
Bob1958  
#1 Posted : Sunday, October 21, 2012 7:10:26 AM(UTC)
Bob1958

Rank: Member

Groups: Registered
Joined: 10/31/2011(UTC)
Posts: 8
This Whirlpool is having intermittant spinning issues on the rinse cycle. Sometimes it spins, sometimes it doesn't. If it doesn't spin and I reach in and turn the drum once by hand and shut the door quickly that will get it going. Is a part going bad or getting worn out?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Sunday, October 21, 2012 3:11:54 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Could be the clutch or basket drive block. You need to remove the cover, bypass the lid switch and observe the clutch housing during spin. If the clutch housing is spinning but the basket drive tube is not, the clutch is slipping. If the basket drive tube is spinning but the basket is not, the drive block is bad or the spanner nut may be loose or the end of the drive tube is damaged. Since you can get it spinning, it is more likely to be a slipping clutch.

Eric
Back to top
Bob1958  
#3 Posted : Monday, October 22, 2012 3:30:59 AM(UTC)
Bob1958

Rank: Member

Groups: Registered
Joined: 10/31/2011(UTC)
Posts: 8
Originally Posted by: fairbank56 Go to Quoted Post
Could be the clutch or basket drive block. You need to remove the cover, bypass the lid switch and observe the clutch housing during spin. If the clutch housing is spinning but the basket drive tube is not, the clutch is slipping. If the basket drive tube is spinning but the basket is not, the drive block is bad or the spanner nut may be loose or the end of the drive tube is damaged. Since you can get it spinning, it is more likely to be a slipping clutch.

Eric
Thanks for the help...I'll get to this next weekend and report back to see if I can determine what parts to order.
Back to top
Users browsing this topic
Similar Topics
Whirlpool Washer spinning problem (Washer Repair)
by KSS 1/26/2013 9:39:50 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET