2 Pages12> Go to Page...

Whirlpool Dryer Drum does not spin Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: YWED9550W	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

born2run		#1 Posted : Monday, August 6, 2012 10:18:46 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		Opened my dryer to find a piece of clothing stuck behind the light cover and the other end stuck under one of the ribs??? on the barrel. I guess this prevented the barrel from turning. When I tried to start the dryer, the lights on the controls would work but the drum would not turn. No wierd sounds, it just would not start turning. Not sure if any heat created. What repair/parts could this indicate?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Monday, August 6, 2012 3:37:08 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely the thermal fuse is blown. If you open the toe panel you can find it on the blower housing. Check it with the multimeter for continuity (with one wire off). The fuse Part number: 3392519 Don't forget to unplug the dryer while checking. Here are the breakdown diagrams and Replacement parts for Whirlpool YWED9550WL1 ELECTRIC DRYER | AppliancePartsPros.com Thank you. Post the results. Simon.
User Profile View All Posts by User View Thanks

born2run		#3 Posted : Thursday, August 9, 2012 4:16:20 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		Yes, it was the thermal fuse! Thanks!
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Thursday, August 9, 2012 9:53:52 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Check the dryer for air flow blockage, clean the vents. Simon.
User Profile View All Posts by User View Thanks

born2run		#5 Posted : Sunday, August 19, 2012 5:01:57 PM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		Ten days later, dryer does not work again. Again, the drum does not spin. Vent was clean. Now what?
User Profile View All Posts by User View Thanks

born2run		#6 Posted : Monday, August 20, 2012 7:14:14 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		Tried replacing the thermal fuse again, but still doesn't work.:(
User Profile View All Posts by User View Thanks

Simon / APP Team		#7 Posted : Monday, August 20, 2012 10:03:00 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		HI. Check the belt, the belt switch #5 diagram #2, door switch. Simon.
User Profile View All Posts by User View Thanks

born2run		#8 Posted : Monday, August 20, 2012 10:18:33 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		Just had service man in to check it. He checked all those and said they all were fine. So he concluded that it was the main electrical board (I can't remember what he called it). Sound reasonable? Looking at a week to order and deliver:(
User Profile View All Posts by User View Thanks

Simon / APP Team		#9 Posted : Monday, August 20, 2012 10:21:57 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Yes it's a good possibility. Simon.
User Profile View All Posts by User View Thanks

born2run		#10 Posted : Tuesday, August 28, 2012 10:02:30 AM(UTC)
Rank: Member Groups: Registered Joined: 8/6/2012(UTC) Posts: 8		okay, ordered the board, serviceman installed it, but still doesn't work!!!!! What could it be? He rechecked all connectivity.:(
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

2 Pages12> Go to Page...