Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
dave2425  
#1 Posted : Monday, July 23, 2012 8:45:20 AM(UTC)
Quote
dave2425

Rank: Member

Groups: Registered
Joined: 7/23/2012(UTC)
Posts: 3

I changed the water filter, dumped the ice, now it wont make ice.

My son broke off the flapper door years ago, but with my hand blocking the sensor, the light blinks twice then off, then twice, then off..... with my hand not blocking the sensor the light just glows red.

Not sure where to go from here, other than I guess I need a new flapper door to start.

Model - KSRB25FKSS04
Make - Kitchen Aid

Thanks,
Dave
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
dave2425  
#2 Posted : Tuesday, July 24, 2012 6:22:33 AM(UTC)
Quote
dave2425

Rank: Member

Groups: Registered
Joined: 7/23/2012(UTC)
Posts: 3

I got the ice maker out this morning to check the voltage. I heard what sounded like a piece of ice in the side cover. I opened the cover and found the plastic gear had boken off.

Should I order the motor module or just order a whole new ice maker unit?

Dave
Simon / APP Team  
#3 Posted : Tuesday, July 24, 2012 10:20:12 AM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Due to the age of the icemaker do not repair it - replace with

new one Part number: 2198597
dave2425  
#4 Posted : Friday, July 27, 2012 4:26:19 AM(UTC)
Quote
dave2425

Rank: Member

Groups: Registered
Joined: 7/23/2012(UTC)
Posts: 3

I got my new ice maker! But I am reluctant to install it because the wiring harness has wires in different places on the connector than the old one.

The new harness is straight through green tan, white, black

The old harness crosses white and black.

motor end -------------- the freezer connector
Connector 1.................Connector 2
pin 1 green-------------> pin 1 green
pin 2 tan---------------> pin 2 tan
pin 3 white ................ pin 3 black
pin 4 black ................ pin 4 white

Has the ice maker been redesigned?
Should I just swap out harnesses?

Thanks in advance for your help.

Dave
Simon / APP Team  
#5 Posted : Friday, July 27, 2012 10:05:30 AM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi

I don't thing it makes any difference, just plug it in or replace the harness.

Thank you.

Simon.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Amana Ice Maker quit working (Refrigerator & Freezer Repair)
by modelships 5/9/2010 10:41:03 AM(UTC)
ice maker quit working (Refrigerator & Freezer Repair)
by Bill88 7/5/2009 11:00:21 AM(UTC)
Ice maker quit working (Refrigerator & Freezer Repair)
by 647sam 6/29/2009 8:54:42 AM(UTC)
Ice Maker quit working (Refrigerator & Freezer Repair)
by jayb 12/29/2008 4:44:28 PM(UTC)
ice maker quit working (Refrigerator & Freezer Repair)
by ptiso 6/29/2008 5:48:34 AM(UTC)
Water to ice maker quit working (Refrigerator & Freezer Repair)
by owenbrewer 6/4/2008 4:07:17 PM(UTC)
ice maker quit working (Refrigerator & Freezer Repair)
by turn543 3/13/2008 2:06:43 PM(UTC)
GE ice maker quit working (Refrigerator & Freezer Repair)
by dottiedrew 3/1/2008 6:42:03 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.