Dryer shuts off and extremely hot Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LER4624BQ2	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

JPV12		#1 Posted : Thursday, July 19, 2012 3:32:20 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2012(UTC) Posts: 3		Dryer runs for a few minutes and shuts off. It gets extremely hot during this short time. What are some possible solutions to fix the problem?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Thursday, July 19, 2012 3:12:31 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. The first thing to check is the air flow through the dryer and the vents. Remove the vent hose from the back of the dryer and run one load of laundry. If it's fine then the vent is blocked. If not - disassemble the dryer and clean the blower housing,chute at the back. Here are the breakdown diagrams and Replacement parts for Whirlpool LER4624BQ2 ELECTRIC DRYER | AppliancePartsPros.com Thank you. Post the results. Simon.
User Profile View All Posts by User View Thanks

JPV12		#3 Posted : Friday, July 20, 2012 3:33:01 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2012(UTC) Posts: 3		Thanks Simon, took vent loose and removed and cleaned chute. Still same problem. Ran dryer on fluff air and it completed full cycle but when put on heat cycle ran for about 10 minutes and shut off. Could this be the motor or a sensor problem?
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Friday, July 20, 2012 10:35:49 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely the motor's overload opens and when it cools down it work again. But the overheating is related to the bad air circulation. You may check the exhaust temperature without the vent hose and if it's more then 155*F and the dryer is still heating up - replace the cycling thermostat Part number: 694674 Run the dryer on Timed. Simon.
User Profile View All Posts by User View Thanks

izaakh.		#5 Posted : Saturday, July 21, 2012 7:46:09 AM(UTC)
Rank: Member Groups: Registered Joined: 7/21/2012(UTC) Posts: 1		I have a westinghouse/auto dry, older (yellow). It had a hole in the lint trap the size of a quarter, we have cleaned everything we can see out of all moving parts. Could it be ssomething else?
User Profile View All Posts by User View Thanks

JPV12		#6 Posted : Saturday, July 21, 2012 1:11:40 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2012(UTC) Posts: 3		Simon, Thanks for the information. I took the dryer apart and there was lint around the motor. I vacuumed all dust out and ran it on timed and it finished the complete cycle. I checked the exhaust and it was 152 during the cycle. Must have been the lint and the heat causing the motor to kick out. Again thanks for the info.
User Profile View All Posts by User View Thanks

Simon / APP Team		#7 Posted : Monday, July 23, 2012 8:30:43 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome. Simon.
User Profile View All Posts by User View Thanks

Simon / APP Team		#8 Posted : Monday, July 23, 2012 8:31:28 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. What is the original problem with the dryer? Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)