A/C Issue - Lennox furnace - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

A/C Issue - Lennox furnace Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: G20Q3/4E-100-3	Brand: -other-	Age: 5 - 10 years
Previous Topic Next Topic

fixerguy123		#1 Posted : Monday, July 9, 2012 7:49:52 PM(UTC)
Rank: Member Groups: Registered Joined: 7/9/2012(UTC) Posts: 3		No ground at Compressor ground terminal on PC board inside furnace. 24V found at Y wire / positive to compressor terminal with meter grounded to chassis when T-Stat in in "cool" mode. Jumper from Chassis (internal transformer) ground to compressor ground wire makes compressor function normally. No issue with heat side. All wires from T-Stat test as normal. Can I assume that the PC board in the furnace needs to be replaced?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fixerguy123		#2 Posted : Tuesday, July 10, 2012 5:55:58 AM(UTC)
Rank: Member Groups: Registered Joined: 7/9/2012(UTC) Posts: 3		Originally Posted by: fixerguy123 No ground at Compressor ground terminal on PC board inside furnace. 24V found at Y wire / positive to compressor terminal with meter grounded to chassis when T-Stat in in "cool" mode. Jumper from Chassis (internal transformer) ground to compressor ground wire makes compressor function normally. No issue with heat side. All wires from T-Stat test as normal. Can I assume that the PC board in the furnace needs to be replaced? I was reminded that I should have said "I had to jump the COMMON compressor wire to the chassis to bypass the "C" terminal." I was thinking in terms of DC wiring rather than low voltage AC when I used the term "ground" Anyone out ther have a schematic for this board? Lennox 48K98 . This is a friend's furnace. I'm just helping someone who's down on their luck. All other BCC board related functions seem normal. If this contact is the only one made by this terminal, can I simply make this temporary contact more permanent and save her some money?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close