Control Box Removal - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Control Box Removal Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ED25TQXGW00	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

EDB		#1 Posted : Tuesday, January 22, 2008 3:27:34 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/22/2008(UTC) Posts: 3		How do I remove the control box and escutcheon plate so I can replace the thermostat? Thermostat only works if you set it max or thump on it at lower settings. Whirlpool Refrigerator ED25TQXGW00.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

jeffp		#2 Posted : Wednesday, February 6, 2008 11:08:27 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 2/5/2008(UTC) Posts: 2		:) I was looking for the same answers last night and today discovered the answer. Provided your control box is the same as mine, there are four screw that have to be removed. The two hex screws on the inside of the fridge which you can see are obvious. The not so obvious are two screws behind the faceplate of the control box. See the following diagram. Model ED25LFXGN00 Part number #3 is the screw on the left. There is another on the right hand side. In order to remove the face plate you have to pry it off from the top and work your way across the top edge. Then it will lift off. I have attached a couple of photos so you can see the back of the faceplate and the control box with the faceplate removed. Hope this helps. jeffp attached the following image(s):


User Profile View All Posts by User View Thanks

EDB		#3 Posted : Monday, February 11, 2008 2:17:44 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/22/2008(UTC) Posts: 3		jeffp Thanks for the help. The trick of removing the face plate from the top after removing the rear screws made the job a piece of cake. Again, thanks for the help.


User Profile View All Posts by User View Thanks

jeffp		#4 Posted : Tuesday, February 12, 2008 7:34:30 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 2/5/2008(UTC) Posts: 2		No problem. Glad I was able to help.


User Profile View All Posts by User View Thanks

giaconsultants		#5 Posted : Friday, June 13, 2008 4:47:42 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 6/13/2008(UTC) Posts: 4		Thanks for the help, I knew that front cover had to come off some how!!!:):):)


User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic
Guest

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close