Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Roper Washer Repair
Options
Go to last post Go to first unread
Model: RAS8445KQO Brand: Roper Age: 5 - 10 years
Previous Topic Next Topic
birdman097  
#1 Posted : Tuesday, April 24, 2012 12:18:30 PM(UTC)
birdman097

Rank: Member

Groups: Registered
Joined: 4/24/2012(UTC)
Posts: 3
I put a load of laundry in that was way too big and now my washer will not drain water or spin. Would you think that it is a pump or a bad lid switch? I had talked with a handyman who said if you replace the lid switch chances are the pump will need replaced as well. The serial number is cl 1429921 type 111. If the parts needed are the lid switch and pump, what is the cost? Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Tuesday, April 24, 2012 1:28:53 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Would the washer agitate?

Post the results.

Simon.
Back to top
birdman097  
#3 Posted : Tuesday, April 24, 2012 1:34:15 PM(UTC)
birdman097

Rank: Member

Groups: Registered
Joined: 4/24/2012(UTC)
Posts: 3
Yes the center piece moves and it works up to the point to when it has to drain the water and spin.
Back to top
Simon / APP Team  
#4 Posted : Tuesday, April 24, 2012 2:36:46 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Most likely it's the lid switch. Use the video to open the washer. When you will get to the lid switch plug, install the jumper wire between two outer wires and start the washer.
Make sure the jumper is making good connection.
If it starts - replace the lid switch.

The lid switch Part number: 3949247
Part number: 3949247


Her are the breakrdown diagrams and Replacement parts for Roper RAS8445KQ0 WASHER | AppliancePartsPros.com

Thank you. Post the results.

Simon.
Back to top
birdman097  
#5 Posted : Tuesday, May 1, 2012 7:00:53 AM(UTC)
birdman097

Rank: Member

Groups: Registered
Joined: 4/24/2012(UTC)
Posts: 3
Simon,
I just replaced the lid switch and my washer is back to running normal again. Your posts and video were extremely helpful and I would not have been able to replace it without you. Thank you very much for everything. This website is amazing and I am going to spread the word to everyone I know. Thanks again.
Back to top
Simon / APP Team  
#6 Posted : Tuesday, May 1, 2012 8:58:49 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You're very welcome.

Simon.
Back to top
Users browsing this topic
Guest (6)
Similar Topics
Looking for Roper washer repair code (Washer Repair)
by Tim F 3/14/2013 6:19:14 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET