Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
kactussjack  
#1 Posted : Monday, April 2, 2012 2:26:25 PM(UTC)
Quote
kactussjack

Rank: Member

Groups: Registered
Joined: 4/2/2012(UTC)
Posts: 1

I sure could use some help. I am reassembling the washer & am trying to install the new tub seal. The thread fit is extremely tight. I removed the old one by driving it off with a punch & hammer. Is this how I should install the new one? Drive it back on?

Also I could not remove the old seal nut without chiseling it out in pieces. What is the best method of installing the new one? I have the plastic adapter that fits over the tab but I have no ida how to tighe it down without damage.

I'm told the spanner wrench that should be used for these two parts is no longer available.

Thanks for the help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, April 3, 2012 2:51:29 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for Maytag MAV6650AWW WASHER, ATLANTIS | AppliancePartsPros.com

If you click on the seal kit a new page will open with a Q&A that may be helpful.

Also here is an Atlantis manual. Even though your unit is not listed with a little luck it will be close.
http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=115

See the attachments for a couple tech bulletins.
File Attachment(s):
37A-B.pdf (79kb) downloaded 21 time(s).
86-B.pdf (1,898kb) downloaded 20 time(s).
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.