Display panel will not display - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Display panel will not display Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RBD275PDB14	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

tex1250		#1 Posted : Sunday, April 1, 2012 2:39:38 PM(UTC)
Rank: Member Groups: Registered Joined: 4/1/2012(UTC) Posts: 1		We noticed that our dbl. oven display panel is not showing the time. When you open the door the oven light will come on and when you hit the control buttons there is a beep for every one, but no display and this will not allow the oven to turn on. We have not used the self cleaning feature so I do not believe that we have a t-stat problem. Any help would be appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, April 2, 2012 3:09:53 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for Whirlpool RBD275PDB14 27" BUILT-IN ELECTRIC DOUBLE OVEN STD-CLEAN LOWER SELF-CLEAN UPPER \| AppliancePartsPros.com Here is a post with a similar problem, it also includes a tech sheet. http://forum.appliancepartspros...ml?highlight=RBD275PDB14 Here is a manual for this unit http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=169 Since it beeps I think the control thermal fuse is OK. Odds are that the control board is toast. If you can program it without the display to see if the oven runs then perhaps just the display drive on the board is shot. Often it is one of the electrolytic capacitors on the board. They can be a bit difficult to replace but if you have some electronics experience it is a lot cheaper than replacing the board. There is no guarantee that this will actually fix the problem as sometimes it is another component that has blown. Also I do not know which capacitor so you have to replace them all unless someone else jumps in with this info.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close