Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
rnhent12  
#1 Posted : 16 years ago
rnhent12

Rank: Member

Groups: Registered
Joined: 8/13/2009(UTC)
Posts: 1

My washer shakes uncontrolably even empty It is level both ways and on a solid floor. I cant figure out how to get the control panel or cabinet off to check springs snubbers etc Thanks for any help you can offer
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : 16 years ago
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

The parts diagrams on this machine show it coming up as a basic Whirlpool Direct Drive washer.

These photos will show you how to take off the cabinet. It may be that instead of screws holding the console down you have clips which will have to be released by sliding a think metal blade under the console at each edge.

Kenmore top loader blues (SublimeMasterJW's Appliance Advice)

I would check the springs and you should consider replacing them even if they look ok, as they can be bad but in a way not noticeable to the naked eye.

Good luck.
Users browsing this topic
Similar Topics
Whirlpool LDA7600W0 Cabinet Removal (Washer Repair)
by rudyrudy 12 years ago
Whirlpool cabinet removal (Washer Repair)
by scott1980 14 years ago
gE wASHER CABINET REMOVAL (Washer Repair)
by CAROLEANNE411 15 years ago
cabinet removal (Dryer Repair)
by vtrike 16 years ago
cabinet removal (Washer Repair)
by beadyiwoman 17 years ago
Cabinet removal (Washer Repair)
by jumbyway 18 years ago
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.