Maytag Electric Dryer Timing Cycle - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Maytag Electric Dryer Timing Cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LDE9334ACE	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

GlennAbello		#1 Posted : Tuesday, August 4, 2009 8:36:32 AM(UTC)
Rank: Member Groups: Registered Joined: 8/4/2009(UTC) Posts: 2		My Maytag dryer has the following problem...it runs fine except for the following abnormality: after I select the dry temperature setting (regular, delicate, etc.) and the dry cycle (timed dry, automatic, etc.) and press the start button, evrything seems to work fine. The dryer motor turns the tumbling assembly, the heater warms the clothing load, but the cycle selector does NOT count down the time remaining for the machine to work, even though the load may have dried in 30-45 minutes. I think that this may be a faulty timer unit, but I want to verify this before I order this part. Thanks for your kind assistance. Regards, Glenn Abello glennabello@yahoo.com


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, August 5, 2009 5:35:17 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Hi Glen If the timer is not advancing in any setting, including timed then I think the timer is the problem. Good luck.


User Profile View All Posts by User View Thanks

GlennAbello		#3 Posted : Wednesday, August 5, 2009 6:43:56 AM(UTC)
Rank: Member Groups: Registered Joined: 8/4/2009(UTC) Posts: 2		Originally Posted by: sidfink43 Hi Glen If the timer is not advancing in any setting, including timed then I think the timer is the problem. Good luck. Hi, Sid... Thank you very much for your reply. I thought that this was the problem, but wanted an expert's advice before I bought the part. I appreciate your response. Glenn


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Wednesday, August 5, 2009 7:13:45 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Ok good I just took a look at that part, and it is expensive. See if there is a "Speed Queen" generic timer available at less cost, or if just the timer motor that can be replaced at a much lower cost. Good luck, hope that solves it.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close