Tappan dryer heater coil connection - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Tappan dryer heater coil connection Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 47-2451 00/01	Brand: Tappan	Age: More than 10 years
Previous Topic Next Topic

carlM		#1 Posted : Monday, August 3, 2009 12:34:37 PM(UTC)
Rank: Member Groups: Registered Joined: 8/3/2009(UTC) Posts: 1		my dryer has stopped heating, there is 3 wires going to the heater coil on top of the baffle heater i see 2 bigger wires connected and 1 skinner wire not the unit has a bolt in the center that secures it to the baffle? I hope this is enough info. and again thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, August 5, 2009 5:32:48 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Hi Carl Test the safety thermostat on top of the coil housing for continuity, and using the two wires that connect to the coil, test them for continuity and resistance (12 to 20 ohms). If they check out take off the front and test the thermostats/fuses on the front of the blower housing Good luck


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close