Rank: Member
Groups: Registered
Joined: 7/25/2009(UTC) Posts: 3
|
our Maytag washer vibrates so bad on the spin cycle, it walks across the floor!!!!!!!!! it is level
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Hi Moses
Can you post the complete model number, there are a lot of Neptunes out there and we need to know which one you have
Thanks
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2009(UTC) Posts: 3
|
Thanks for getting back to me! the model no. of the neptune washer is MAH8700AWW . Thanks again, I will be waiting to hear from you. Ron
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Ok, Thanks You are going to want to look for something loose in the pulley or the suspension. Start with taking off the back and testing the pulley for tightness. Here is the service manual which will help you take off parts of the cabinet and look at the other components. http://www.servicematters.com/m...ibrary/docs/16026126.pdfGood luck.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2009(UTC) Posts: 3
|
Thank you for all your help!!! Take care, Ron
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close