You'll like this... I had to repair my dryer last night for poor performance in drying (cleaned ductwork of years of lint). To get to the dryer, I unplugged and moved the washer out of the way, nothing more. I plugged it in 2 hours later but did not try to use it until several hours later.

It is a Kenmore Elite Quiet Pak II Model # 110.23032102 Type 111

Now, when I go to start the washer and pull the knob to start the machine, I am getting a humming sound only instead of the usual filling of the tub to begin the cycle. I tried to see if I get any other operation in the spin cycles, different washer speeds, spin cycles, water levels etc...with the same results.

All it does now is make the humming sound, the sound appears to be coming from the control panel area. I tried to unplug to "reset" the unit but to no avail.
Any suggestions on the issue that I can check into? Thanks.

or maybe the fill hoses got kinked when you put the washer back in place.

I did not know that water pressure would affect the start of a machine. I will have to read up on how this functions. Thanks A.J. for your wisdom and guidance. Issue resolved!