Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
christ_ja  
#1 Posted : Wednesday, July 15, 2009 4:05:20 AM(UTC)
Quote
christ_ja

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 6

I just checked the voltage between the primary coil lines when the unit is powered up and running and i have nothing. All three switches have continuity. Ive also already replaced the magnetron and rectifier. Anything else i should look at before spending $130 on a new control board?

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
christ_ja  
#2 Posted : Wednesday, July 15, 2009 4:19:33 AM(UTC)
Quote
christ_ja

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 6

The fuse and thermal Fuse also check out OK.
christ_ja  
#3 Posted : Friday, July 17, 2009 5:20:06 PM(UTC)
Quote
christ_ja

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 6

All fixed. New control board.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.