Whirlpool gas range E2 F3 w/ 2 new sensors - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool gas range E2 F3 w/ 2 new sensors Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GS475LEMS1	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

jeffmaaske		#1 Posted : Sunday, January 22, 2012 1:25:55 PM(UTC)
Rank: Member Groups: Registered Joined: 8/31/2011(UTC) Posts: 8		Last month oven showed E2 F3 for any temp over 400. Checked resistance on both sensors every 50 degrees. Found issue with bottom sensor. Replaced it. Still got E2 F3. Replaced top sensor. Still getting E2 F3 for any temp above 400. Tech sheet states "replace control". Is this part number 4453608 on the diagram? Any other suggestions before I spend $$ would be appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

jeffmaaske		#2 Posted : Monday, April 21, 2014 4:42:06 AM(UTC)
Rank: Member Groups: Registered Joined: 8/31/2011(UTC) Posts: 8		Update: I removed the control unit (easy) and sent it to CoreCentric Solutions in IL. They repaired it in less than a week. I installed it and tested it to 475. So far so good. I will update if something changes.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close