Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag not spinning fast enough
Options
Go to last post Go to first unread
Model: MAV7700AWW Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
smcdonald  
#1 Posted : Wednesday, January 18, 2012 8:06:22 AM(UTC)
smcdonald

Rank: Member

Groups: Registered
Joined: 1/18/2012(UTC)
Posts: 2
My Maytag top load washer will not spin fast enough to get all the water out of the clothes. It DOES evacuate all the water from the tub, but does not kick up to the high speed spin. It has a single belt. What are the possible problems, and how do i determine the solution? Thank you!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Thursday, January 19, 2012 5:48:42 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Fixing spin problems on these models starts with this part kit here.

Part number: AP4009132
Part number: AP4009132


Instructions are included and I strongly advise you have a helper, you will be much happier with one, although the helper may not be all that happy.
Back to top
smcdonald  
#3 Posted : Friday, January 20, 2012 7:47:48 AM(UTC)
smcdonald

Rank: Member

Groups: Registered
Joined: 1/18/2012(UTC)
Posts: 2
Outstanding - thank you very much. I will try this part and probably a new belt while I'm at it.

Again thanks
Back to top
LeoDe  
#4 Posted : Friday, January 20, 2012 12:23:06 PM(UTC)
LeoDe

Rank: Member

Groups: Registered
Joined: 1/20/2012(UTC)
Posts: 2
Originally Posted by: sidfink43 Go to Quoted Post
Fixing spin problems on these models starts with this part kit here.

Part number: AP4009132
Part number: AP4009132


Instructions are included and I strongly advise you have a helper, you will be much happier with one, although the helper may not be all that happy.


cool, is that the pulley for hte transmission shaft? I have a similar issue with an MAVT236AWW, that pully "feels " good when I inspected it nothing felt loose or moving with it. What does this do, is this the clutch assembly (of sorts)? Also, could a defective pump produce the same results as we are seeing?

sorry for all the questions, just trying to make an informed decision about parts purchase
Back to top
sidfink43  
#5 Posted : Friday, January 20, 2012 1:01:53 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Leo

That is the transmission pulley and yes the pulley should turn freely and no it is not the clutch.

This device rides up and releases the brakes so the machine can spin.

If you buy the part from this site and it does not fix the problem you can return it, see the returns policy for details and conditions.

good luck
Back to top
Users browsing this topic
Similar Topics
Maytag not spinning fast enough to dry clothes (Washer Repair)
by Jdb929 6/18/2012 5:28:03 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET