help with orientation of wire connectors to water valves. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

help with orientation of wire connectors to water valves. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JCD2389DES	Brand: Jenn-Air	Age: 5 - 10 years
Previous Topic Next Topic

iamnotmad		#1 Posted : Saturday, January 7, 2012 6:49:31 AM(UTC)
Rank: Member Groups: Registered Joined: 1/7/2012(UTC) Posts: 2		Hello, I just replace both valves in the back of the fridge, but I failed to note the orientation of the connectors (dumb!). Can anyone provide a photo of theirs or describe which way the wires go. I know which SIDE of each valve the power connectors go on (red/blk) but don't know the orientation. Seems to me if the orientation is wrong I would damage the valve, is that true? Thanks a lot for help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Saturday, January 7, 2012 8:19:01 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Both solenoids are non-polar. When you plug them in, verify the fountain water works.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close