Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Proper removal and replacement of thermostat
Options
Go to last post Go to first unread
Model: KGRA806PSS02 Brand: Kitchen Aid Age: 1 - 5 years
Previous Topic Next Topic
paulNjen  
#1 Posted : Monday, July 6, 2009 4:56:15 PM(UTC)
paulNjen

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3
I am replacing the thermostat

Part Number: AP3086326 made by WHIRLPOOL



I am unsure how to remove it, is there a special tool or do I just pry it loose. The connection is pretty solid. I do not want to remove and then be unableUserPostedImage to achieve the same secure connection.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Dan O.  
#2 Posted : Monday, July 6, 2009 6:07:30 PM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
Quote:
I am replacing the thermostat Part Number: AP3086326. I am unsure how to remove it, is there a special tool or do I just pry it loose.

You mean after its mounting screws have been removed it is still stuck to the surface?

If so, they might have use a heat conductive paste while originally installing it. In that case yes it should be able to be pried off (after its mounting screws have been removed of course) and then resealed with similar material (see the following link).

LINK > Thermalmastic

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~
Back to top
paulNjen  
#3 Posted : Monday, July 6, 2009 6:38:17 PM(UTC)
paulNjen

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3
No I'm sorry I was not clear the connection of the thermostat to the wires. Mounting screws release ok. Not sure exactly how to disconnect part from wires, do they just pull out or what, the connection is so secure. I guess I really have nothing to lose since the part is shot anyway.
Back to top
Dan O.  
#4 Posted : Monday, July 6, 2009 9:24:35 PM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
Quote:
how to disconnect part from wires, do they just pull out

Yes, the wire terminals push onto the metal terminals of the thermostat.

Quote:
the connection is so secure

Good! Otherwise you'd get sparking electricity and likely damage to the part they are attached to. :eek:

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~
Back to top
paulNjen  
#5 Posted : Tuesday, July 7, 2009 7:48:20 AM(UTC)
paulNjen

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3
Well we will be unplugging before replacing the thermostat
Back to top
Dan O.  
#6 Posted : Tuesday, July 7, 2009 11:00:42 AM(UTC)
Dan O.

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
Quote:
we will be unplugging before replacing the thermostat

That's good but not what I meant.

A loose wire connection generates heat when power flows through it. Without a really tight connection between the wire terminal and the component terminal heat will be generated while in use often leading to a failure of one component or another. That's why effort is needed to remove wires from components.

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET