Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Hello
Options
Go to last post Go to first unread
Model: GSS22SGMC BS Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
tmilano911  
#1 Posted : Friday, July 3, 2009 7:06:02 PM(UTC)
tmilano911

Rank: Member

Groups: Registered
Joined: 7/1/2009(UTC)
Posts: 8
Hello, The freezer section has frost on the back plate, but isn't really frozen, and the refer side is cool, but not cold.

The fan inside the freezer is blowing, as is the fan that blows over the coils.

Any suggestions?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Saturday, July 4, 2009 5:33:24 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Remove the freezer back panel and describe the frost pattern.
Back to top
tmilano911  
#3 Posted : Sunday, July 5, 2009 12:36:26 PM(UTC)
tmilano911

Rank: Member

Groups: Registered
Joined: 7/1/2009(UTC)
Posts: 8
After removing the back panel it is frozen solid. About every 3 days i have to take a hair dryer to melt the ice before.
Back to top
richappy  
#4 Posted : Sunday, July 5, 2009 2:24:34 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Remove the cover over the motherboard in the back of fridge., and remove the 3 pin power connector. Stick a jumper wire between the Li pin and defr. If the freezer defrosts, you have a bad motherboard, just order on this site. If not, you probably have a bad defrost heater in the freezer.
Back to top
tmilano911  
#5 Posted : Monday, July 6, 2009 7:35:53 PM(UTC)
tmilano911

Rank: Member

Groups: Registered
Joined: 7/1/2009(UTC)
Posts: 8
Whats the Li pin and i put the jumper wire between the Li pin and the def. on the back or inside the freezer.
Back to top
richappy  
#6 Posted : Tuesday, July 7, 2009 12:44:31 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
The motherboard has a 3 pin power connector. On the pc board. the one pin has (LINE) on it, the outer pin has (DEFR). The jumper goes between these two pins on the removed connector.
Back to top
Users browsing this topic
Similar Topics
RE: Hello (Washer Repair)
by robertee 10/24/2011 5:56:11 AM(UTC)
Hello (Dryer Repair)
by gary42206 4/19/2010 9:11:32 AM(UTC)
Hello (Refrigerator & Freezer Repair)
by nardone3 9/9/2009 7:01:40 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET