Rank: Member
Groups: Registered
Joined: 6/29/2009(UTC) Posts: 1
|
I just installed a new main board (#WR55X10656) because neither the refigerator or freezer was getting cold. The freezer is working fine now but the refrigerator side is still not getting cold. Did I need to cut any of the wires while installing the new board or is there something else wrong? It was an appliance tech who checked out the fridge and said it was the board causing the problem.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/10/2009(UTC) Posts: 1,363
|
The fridge gets its cold air from the freezer through a vent between the freezer and fridge.The fan in the freezer blows air through it. There is a flap you adjust with the fridge temp. control. Make sure it's open.
If the evaporator coils behind the back panel of the freezer are icing up because of auto defrost failure that will stop the circulation of cold air and eventually affect the freezer too.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close