Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
medic860  
#1 Posted : Thursday, December 15, 2011 9:53:43 AM(UTC)
medic860

Rank: Member

Groups: Registered
Joined: 12/15/2011(UTC)
Posts: 1

The washer is overflowing and the water is still running. I replaced the water level switch and hose exactly as your video showed me. The water is still overflowing. What is the next step?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted : Thursday, December 15, 2011 1:32:42 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: medic860 Go to Quoted Post
The washer is overflowing and the water is still running. I replaced the water level switch and hose exactly as your video showed me. The water is still overflowing. What is the next step?


Medic,

The water inlet / fill valve is the next move.

Part number: AP3094541
Part number: AP3094541


Start the washer and allow it to fill for a few seconds, then unplug the power cord from the wall outlet, if the water continues to flow in, or is slow to react, then replace the it.

If it stops as soon as it's unplugged, re check the wiring to the water level switch, and the air dome tube for kinks, twists or holes.

Good Luck,
:) :) :)
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.