Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
whirlpool extra care system stops at rinse cycle
Options
Go to last post Go to first unread
Model: WTW53215QO Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
mattyjohn  
#1 Posted : Friday, December 9, 2011 2:10:40 PM(UTC)
mattyjohn

Rank: Member

Groups: Registered
Joined: 12/9/2011(UTC)
Posts: 3
I had found similar topics on this subject but not for the same model number washer. The unit stops during the wash as soon as it hits the rinse cycle and the water drains. It hums a little but nothing else. I am wondering what the issue may be.

I apologize if this question has already been answered, truly.

Matt
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ApplianceJunk  
#2 Posted : Friday, December 9, 2011 2:19:05 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
Hi,

The washer uses cold water for the rinse cycle. Could be that it's not getting any cold water because the screen in the water inlet valve is plugged or the water valve is bad and needs to be replaced.
Back to top
mattyjohn  
#3 Posted : Friday, December 9, 2011 2:31:04 PM(UTC)
mattyjohn

Rank: Member

Groups: Registered
Joined: 12/9/2011(UTC)
Posts: 3
Is this easy to check?

Thanks for reply btw.
Back to top
ApplianceJunk  
#4 Posted : Friday, December 9, 2011 2:34:56 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
To check the screens in the water inlet valve you need to turn the hot and cold water inlet hoses off and remove them from the back of the washer. You will then be able to look into the water inlet valve and see the screens to see if they are plugged up.

To check the water inlet valve to see if it's bad you would check the coils for continuity with a ohm meter.

This video will show you how to replace the water inlet valve.
Washer Water Inlet Valve (part #285805) - How To Replace - YouTube
Back to top
mattyjohn  
#5 Posted : Friday, December 9, 2011 2:38:58 PM(UTC)
mattyjohn

Rank: Member

Groups: Registered
Joined: 12/9/2011(UTC)
Posts: 3
thanks again for this. Much appreciated
Back to top
ApplianceJunk  
#6 Posted : Friday, December 9, 2011 2:54:50 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
Your welcome, let me know how it works out for you or if you have any other questions.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET