replace door & freezer gasket - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

replace door & freezer gasket Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ET18AKXMNR0	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

momeyd		#1 Posted : Friday, June 19, 2009 4:42:07 AM(UTC)
Rank: Member Groups: Registered Joined: 6/19/2009(UTC) Posts: 2		Need instructions to replace my gaskets. Getting condensation around the freezer door. I assume I need to replace the gaskets. I've identified the parts I need and the gasket cement. When I remove the old gasket, do I need to scrape off the old cement, etc. Need complete instructions. Thanks, Dave M


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

woodchuckie		#2 Posted : Saturday, June 20, 2009 4:07:45 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/10/2009(UTC) Posts: 1,363		Diagram 3 shows your gasket(if this is your model). I don't see any cement offered. Not sure you need cement. But if you have old cement on yours, remove it. Replacement parts for WHIRLPOOL ET18AKXMWR0 \| AppliancePartsPros.com


User Profile View All Posts by User View Thanks

momeyd		#3 Posted : Saturday, June 20, 2009 4:45:00 AM(UTC)
Rank: Member Groups: Registered Joined: 6/19/2009(UTC) Posts: 2		Thanks for your reply Woodchuckie !!! Dave M


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close