Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
paulgdav  
#1 Posted : Sunday, June 14, 2009 4:20:52 AM(UTC)
paulgdav

Rank: Member

Groups: Registered
Joined: 6/14/2009(UTC)
Posts: 9

I have two of these washing machines. Both of them were bought at the same time about a year ago or so. We recently put both of them into use. one of them worked about two months and the otheer did about 12 loads. I have it narrowed down to the circut board on top of the motor. one of them blinks 9 times indicating that the brake risistor is open and the other blinks 6 times indicating that to rotor is locked. I have switched circut boards and the indicator follows the circut board. Is there a way to reset the circut board?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
applianceman  
#2 Posted : Sunday, June 14, 2009 10:39:41 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648

This page tells about the error codes and how to reset the board HydroWave GE Washer Repair Guide

I recommend clearing the code and if it comes back replace the part indicated by that page.
paulgdav  
#3 Posted : Monday, June 15, 2009 10:02:25 PM(UTC)
paulgdav

Rank: Member

Groups: Registered
Joined: 6/14/2009(UTC)
Posts: 9

Thanks so much for the information. Both of the machines are working now.

Paul
Users browsing this topic
Similar Topics
maintenance director Bongolo Hosital (Washer Repair)
by paulgdav 1/13/2010 8:18:25 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.