Original problem with this double oven was that every button on the control pad that was depressed, would display a 6 in the display. All the buttons on the control pad were functioning as advertised with an audible beep. Just could not use any of the bake features as a result of all those 6's in the display. Broil both high and low functioned correctly. Contacted GE. They told me to change the oven control board. I ordered and subsequently recieved an oven control from appliance parts pro. Installed unit, plugged in per instructions. None of the buttons on the keypad work other than the clear button. I get an F7 code when I unplug the ribbon cable. I can clear that by depressing clear. Could someone please give me some insight on this problem. My wife is talking about a new oven which we can't afford.

The color of the control panel is white and the number between the W's is 1.

With the old control board, I could depress every button on the keypad and I would get an audible beep and the number 6 on the display. Every subsequent key that I depressed on the keypad would also beep and another 6 would be displayed. This sequence continued until the display was filled with 3 6's. Not a good sign!! Now all that is displayed is the clock of which I cannot change.
Is it possible that the original problem was the control panel and not the oven control board? Or is the existing control panel/keypad not capatible with the new control board?